1.Use the Keygen.exe to generate your PTC HOST_ID license file;
1：按说明,运行 keygen.exe ,填入网卡ID(PTC HOST ID),生成一个LIC文件.修改此LIC文件,将 _hostname_改为自己的计算机名!
----------------------------
注意：HostID输写格式为：XX-XX-XX...保留中间的-,否则生成的Lic无效。
----------------------------
2.Install the PTC License Server with your PTC HOST_ID license file which you got from Step 1;
2：安装PTC License Server先。并使用第1步生成的License授权文件（类型选单机版安装）
重启电脑!!!(不重启会提示LICENSE版本不对的报错,要重起电脑这事!!!)
这步是关键!!!!!!
3.Install Pro/ENGINEER, and select Single Server license type as the Pro/ENGINEER license;
then fill "your computer name" as the HOSTNAME in the BLANK before the port "7788".
安装Pro/Engineer Wildfire 3.0,授权类型选择Single Server license type（单机服务器）做为Pro/e授权方式。
然后填写你的"your computer name"（电脑名可在安装PRO/E界面上找到）作为Hostname。（填写位置在7788数字前面那个空白框框内）
选择一种自己喜欢的语言安装。
*If you click the Setup Option" VERICUT (R) for Pro/ENGINEER" when you install Pro/ENGINEER and wanna the VERICUT as the
*embedded software for pro/e, you should also do the following two steps for the embedded VERICUT:
如果你选"VERICUT (R) for Pro/ENGINEER" 选项要安装这个软件，那还需要做如下两步(如果没选中这项目安装则无需如下处理)：
* A. Copy the patched CGtech.dll into the installed directory \proeWildfire 3.0\i486_nt\obj to replace the original one.
第一步：将Crack下的CGtech.dll复制到你的安装目录\proeWildfire 3.0\i486_nt\obj目录下覆盖原来存在的。
* B. Find the following file in the installed directory \proeWildfire 3.0\bin\proev.bat and open it with an Editor software,
第二步. 打开\proeWildfire 3.0\bin\proev.bat并编辑这个文件。搜索：Vericut %argstr% 并全改成Vericut %argstr% PTC_KEY=0
然后保存！
* search
* Vericut %argstr%
* and replace it with the following string:
* Vericut %argstr% PTC_KEY=0
* then save the file. the purpose of the step B. is to forbid the VERICUT to use the PTC lic as its lic.Actually, CGtech
* no longer supports its VERICUT as an embedded software for pro/e and no longer uses PTC lic.FYI, See the CGtech official
* website said:
* target="_blank">http://www.cgtech.com/ptc_update/index.htm
4.Install Pro/Mechanica(Structural and Thermal Simulation) like Step 3.
安装Pro/Mechanica步骤同第三步
5.Install PTC Distributed Services.this step will automatically get the lic from the lic server installed at step 2.
6.That is all and enjoy it!
其他几步就不用说明了。：）看英文。
这是全功能版（M010）,具体的安装方法还可参考ProE3.0参考安装说明目录